 |
Denon A/V Multi-Channel/Zone Surround
Receiver ::
The AVR-5805 incorporates a host of new technologies,
circuits, and functions to achieve DENON’s ultimate aim for
all its amps, which is to recreate the producer’s original
intent with absolute fidelity. The "New DDSC-Digital" surround
processor, developed around DENON’s design concepts for high-quality
sound reproduction, is now equipped with the latest 32-bit floating-point
DSP as well as newly-developed AL24 processing, high-performance
24-bit/192-kHz D/A converter, and other much improved technologies.
The AVR-5805 is also endowed with a wide range of features such
as a hefty10-channel power amp capable of bi-amp drive, new Auto
Set-up utilizing multi-point measurement and analysis to support
the entire listening area, Room EQ (equalizer), advanced digital
audio interfaces including DENON Link and IEEE 1394, support for
THX Ultra2, multi-zone system, newly-developed analog video scaler,
DVI/HDMI video selector, and full up/down video conversion. These
new technologies, circuits, and features enable the AVR-5805 to
reproduce the original design intent of content producers from a
wide range of sources in such areas as surround sound, multi-channel
audio, 2-channel stereo, and video.
Audio Section ::
- New DDSC-Digital,' for dramatically improved processing performance
The New DDSC(Dynamic Discrete Surround Circuit)- Digital is a high-quality
surround sound reproduction circuit designed by DENON, and
forms the core of the design concept that DENON pursues for all its A/V
amps: to faithfully reproduce the original intent of content producers.
DENON has succeeded in developing a fully discrete design for the New
DDSC-Digital in which high-performance ICs are used in independent blocks
to form a signal processor that reproduces surround sound, and the discrete
design ensures that all channels are endowed with identical response
and quality of sound.
- New 32-bit floating point DSP
Three of the latest 32-bit floating point DSPs for the decoder
for main zone. A latest generation 32-bit floating point SHARC
DSP for the second zone.
- 24-bit/192-kHz D/A Converter
The latest high-accuracy 24-bit/192-kHz D/A converter has been
employed for the audio DAC. The AVR-5805 has 8 of these D/A
converters for 16 circuits, achieving differential drive for
all 16 channels and digital-to-analog conversion with wide
dynamic range at a high S/N.
- High-performance A/D Converter
A high-performance A/D converter of 24-bit/192-kHz quality has
been used to significantly boost S/N and dynamic range.
- Advanced
AL24 Processing,' the latest technology for high sound quality
- DENON
Link, enabling high-speed, high-grade digital signal transmission
- IEEE
1394 digital interface
- Large-output Power Amp Section and Power
Supply Configuration, for stable high-power output
- 10-channel
power amp, supporting multiple uses
Since the 10 speaker terminals can be assigned to any channel,
the AVR-5805 can be used to enjoy home theater entertainment
in the following configurations:
• One dynamic 9.1-channel surround system in a single
room
• 5.1-channel theater environments in two different rooms, both
operating simultaneously
• Multi-zone system: a 7.1-channel theater
in the main room, a 2.1-channel environment in a second
room, and a monaural environment in a small third
room.
• "Bi-amp" system: Front (L/R) and Center speakers
are bi-wired in a 7.1-channel theater to improve
playback quality in the front for enhanced listening enjoyment.
- Stabilized,
independent power supplies for each circuit
- Chassis construction to surpress
internal/external vibration
- Pure Direct mode, for the pure enjoyment
of music in high-quality sound
- Variable Gain Volume and Pre-amp
- New Auto Set-up and Room EQ,
Featuring MultEQ from Audyssey, for overall listening area support
- Full
support for the most advanced surround playback formats
• Dolby Digital EX - Dolby Digital - Dolby Pro Logic IIx
• Dolby Headphone - DTS-ES - DTS 96/24
• DTS Neo:6 - DTS - HDCD
- THX, THX Surround EX,
THX Ultra2
- Original surround modes from DENON
Video Section ::
- Newly-developed video circuitry, for high picture quality
• HDMI/DVI digital video I/O terminals
• Component video switching
• Video up/down conversion
• I/P conversion and scaling
• High-speed, high-accuracy 12-bit/216-MHz video DAC
• TBC (Time Base Correction) technology is used when converting
composite video or S-video signals to component video
Expandability ::
- Analog EXT IN terminal
- 4-zone, multi-room support
- Ethernet and RS-232C terminals
Other Functions ::
- Auto Surround Back Channels ON function, for auto-detection of supporting
sources
- Auto Surround mode
- New design and ease-of-use
• Front panel's large display.
• A cursor key and Butons on the front panel
- EL remote controller for easy operation
- On-screen display, for
easier, error-free operation
- Variable subwoofer crossover switching
(40/60/80/90/100/110/120/150/200/250 Hz)
- Muting level settings
(∞/-40dB/-20db)
- Audio Delay function (max. 6 frames)
Input/Output Terminals For Every
A/V System ::
- Audio Inputs
• 13 Sets Analog Inputs; .............. PHONO, CD, (TUNER), CDR/TAPE,
DVD, VDP, TV, DBS, VCR-1, VCR-2, VCR-3, VCR-4, V.AUX(FRONT),
1 Set 10-ch Analog EXT. Input .......... FRONT L/R, CENTER, SURROUND
(A) L/R, SURROUND (B) L/R, SURROUND BACK L/R, SUBWOOFER
• 1 Set 6-ch Analog EXT. Input ............ FRONT L/R, CENTER,
SURROUND L/R, SUBWOOFER
• 12 Sets Digital Input ................. OPTICAL
x6 (incl. FRONT x 1) COAXIAL x6, Denon Link x1
- Audio Outputs
• 10 Sets Analog PRE Output ... FRONT L/R, CENTER, SURROUND(A)
L/R, SURROUND(B) L/R, SURROUND BACK L/R, SUBWOOFER
• 5 Sets Analog REC Output .... VCR-1, VCR-2, VCR-3, VCR-4,CDR/TAPE
• 3 Set Analog Multi Zone PRE Output.... ZONE2 L/R, ZONE3
L/R, ZONE4 L/R
• 3 Sets Digital Output .............. OPTICAL x3
• Video Inputs ::
• 6 Sets Component Video Input .. VIDEO-1, VIDEO-2, VIDEO-3,
VIDEO-4, VIDEO-5
• 9 Sets S-Video Input .............. DVD, VDP, TV, DBS,
VCR-1, VCR-2, VCR-3, VCR-4, V.AUX(FRONT)
• 9 Sets Composite Input .......... DVD, VDP, TV, DBS,
VCR-1, VCR-2, VCR-3, VCR-4, V.AUX(FRONT)
- Video Outputs ::
• 3 Set Component Video Output .. MONITOR x3 (incl. 1
set for ZONE2)
• 7 Sets S-Video Output ........... VCR-1, VCR-2, VCR-3,
VCR-4, MONITOR, ZONE2, ZONE3
• 7 Sets Composite Output ....... VCR-1, VCR-2, VCR-3,
VCR-4, MONITOR, ZONE2, ZONE3
Specifications ::
- Power Amplifier Section
Rated output *THD figures are power amp stage values.
Front...................................................... 170W
+ 170W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W + 200 W (6 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Center................................................... 170W
(8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W (6 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Surround (A, B)................................... 170W + 100W
(8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W + 200 W (6 ohms, 20 Hz - 20 kHz, 0.05 % THD)
Surround Back..................................... 170 W + 170
W (8 ohms, 20 Hz - 20 kHz, 0.05 % THD)
200 W + 200 W (6 ohms, 20 Hz - 20 kHz, 0.05 % THD)
- Preamplifier Section
Analog
Input sensitivity / imepdance 200mV/47kohms
Frequency response .............. 10Hz-100kHz: +0,-3dB (Direct mode)
S/N ........................................ 105 dB(Direct mode)
Rated output ......................... 1.2 V
Digital
D/A output ............................. 2.0 V
Phono
Input sensitivity / impedance.. 2.5 mV
RIAA deviation ...................... +/-1dB(20Hz to 20kHz)
Rated output ......................... 150 mV
- Video Section
Frequency response
Composite video/S-video ...... 5 Hz-10 MHz (+0,-3dB)
Component video .................. 5 Hz-100 MHz (+0,-3dB)
- FM
Section
Tuning frequency range...................... 87.5 - 107.9 MHz
Usable sensitivity................................ 1.0 µV
(11.2 dBf)
- AM Section
Tuning frequency range...................... 520 - 1710 kHz
Usable sensitivity................................ 18 µV
General
- General
Power supply ........................... AC120V, 60Hz
Power consumption .................. 13 A
Dimensions .............................. 434 (W) x 280 (H) x
505 (D) mm
(17-3/32” x 11-1/32” x 19-7/8”)
Weight ...................................... 44.0kg
(97 lbs)
|
|
