 |
Denon A/V Multi-Channel/Zone Surround Receiver ::
- NEW UPDATED "A" VERSION!
- DOLBY DIGITAL PLIIx,
HDCD DECODERS and DENON LINK III Added!
- THX Ultra2 Certified
- THX Surround EX; DTS Extended Surround Discrete
6.1; DTS ES Matrix 6.1; DTS Neo:6 Cinema & Neo:6 Music Matrix Decoding;
Dolby Digital EX; Dolby Pro Logic II; Dolby Headphone; DTS
- Ultra
2 7.1 Cinema and Music modes
- Lucasfilm Home THX Cinema 4.0, 5.1
and 6.1ES post-processing
- DVD-Audio decoding with Adjustable
Digital Bass Management, Delay, Channel Levels and Tone Controls,
through DENON Link or External Analog Inputs
- DDSC-Digital featuring
New dual Analog Devices HammerHead SHARC 32-bit floating point
DSP processors
- 7 Channels equal power amplifier section
- 170 watts per channel (8 ohms,
20 Hz-20 kHz, <.05%THD)
- 200
watts per channel (6 ohms, 20 Hz-20 kHz, <.05%THD)
- 24
bit, 192 kHz A/D conversion (Burr-Brown PCM-1804
x 4) on all analog inputs, including External 7.1
inputs
- 16
Burr-Brown PCM-1738E 24-bit, 192-kHz highest resolution
DACs, with DSD compatibility - each audio channel
operating in differential mode • Pure Audio mode,
features 4 DACs per audio channel in dual-differential
mode
- ALPHA 24 Processing Plus in Stereo/Direct/Pure
Direct modes (left/right channels)
- 4 24 bit, 192 kHz Digital
Interface Receivers
- 3 sets component video inputs, compatible
with wideband (480p, 720p, 1080i) response for progressive DVD,
DTV (100 MHz)
- 8 sets composite and "S" video inputs
- Video Conversion of
Composite to S-Video and/or to Component
- 1 AC-3 RF digital input
for laser disc
- TWO sets of 7.1 external wide bandwidth (100 kHz)
inputs for multi-channel formats with full Bass Management(defeatable)
- 11(5
Coax, 6 Opt.) assignable digital inputs • 8 Channel Digital
External Inputs
- 13 analog inputs
including built-in AM/FM tuner
- Multi-Zone 1 stereo pre-amp outputs
with video output
- Multi-Zone 2 outputs, pre-amp outputs or speaker
outputs
- RS-232C port for external controllers
- Remote In/Out Ports
- 12 and 5 volt triggers
- DENON Link 3rd Edition, ready for SACD digital
transmission
- Variable high/low pass Crossover 40/60/80/100/120
- Front, center, surround
and surround back bass and treble control
- Subwoofer bass control
- Audio Delay adjustment to match audio signals
with video signals(0-200ms)
- Digitally regulated volume control
with .5dB increment adjustments and step range of -80 to +15 • Delay
time adjustment increased to 20 feet per speaker in .1 foot increments • Auto
Surround Mode stores modes by signal type(analog or digital)
in memory • On-Screen
Display
- AKTIS
RC-8000 LCD
touchpanel remote with IR and RF transmission capability included • AKTIS
RC-8001ST Charger/RF
Base Station included • Optional power amp D.C.
control cable
part number 2032247004 (through parts) • Download the owner's manual
in PDF format - Click on the Tech Note/Whitepaper icon to download
'Update Supplement' for the owner's manual • Dimensions:
17.1"w x 8.5"h x 19.1"d •
7.1 A/V Reference Receiver with THX Ultra2 Certified THX Surround EX/DTS
ES 6.1 Discrete/Dolby Digital EX Pro Logic II/DTS Surround
The AVR-5803 surround receiver inherits the critically acclaimed amplifier
design characteristics of the AVR-5800 while adding
Denon's much improved DDSC-Digital sound processor for greater
diversity in multi-channel reproduction of digital and analog
signals. The AVR-5803's objective is to bring out the maximum performance
potential of all types of sound sources. This model also
provides a video conversion function for greater monitior connection
flexibility, the added convenience of variable subwoofer crossover
switching, that will ensure a listening environment that is as
close to ideal as possible. With its support of THX Ultra2, Dolby
Pro Logic IIx, HDCD decoder and a wealth of other features, the
AVR-5803 has become Denon's latest “Surround Reference” A/V
receiver for serious home theater enthusiasts.
THX Ultra 2 Certified A/V Surround Receiver
with New Dolby Pro Logic IIx and HDCD Decoder ::
THX Ultra2 Certified
7-channel High Power Amplifier ::
Front.................. 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05
% THD)
Center ............... 170 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround ........... 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05 %
THD)
Surround back... 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
The
AVR-5803 features an equal power 7-channel amplifier section, with
identical amplifier design on all 7 channels. The Front (L/R), Center,
and Surround (L/R) channels are driven by 170 watts of power each,
and the two Surround Back channels, used for 6.1-channel DTS-ES and
DOLBY DIGITAL EX sources, are also each powered with 170 watts (all
channels rated into 8 ohms, 20 Hz - 20 kHz). High current, low impedance
drive-capable discrete power transistors are used for each channel,
and the high power output of 170 watts per channel (into 8 ohms) ensures
that the speakers are driven with ample foundation to reproduce movie and
music soundtracks with superb fidelity and the widest dynamic range. The
AVR-5803 proudly bears the THX Ultra2 logo, certifying that it satisfies
the newest certification standards of Lucasfilm Ltd., governing performance,
features, sound quality, power, stability into low-impedance speaker
loads, and ease of operation.
Accurate
Signal Transmission from the Pre-amplifier Section ::
Parts suitable for high attenuation have been strictly selected for
use in the volume circuit that controls the signal levels of all
eight channels. Since a differential D/A configuration has also been
adopted for each channel, the widest possible dynamic range is secured
with mutual interference effectively suppressed across the entire
frequency range. The pre-amp's gain is varied to match the output
level, improving S/N in the range where the volume is often used.
Highly accurate volume adjustment in variable steps of 0.5 dB in
the range of -80 to +15 dB is possible as well.
High-quality Pure Audio Chassis Construction ::
By positioning the power transformer at the center of the unit, the
AVR-5803 is equipped with a chassis construction in which unwanted
vibrations are suppressed and excess vented heat is minimized. The
digital circuits have been placed in the lower center of the unit
and are completely shielded in their own enclosure, and the power
amp circuits are located on the left and right sides. In addition, the
analog circuitry has been isolated from the video circuitry to completely
eliminate any mutual interference. The total chassis design preserves the
purity of the audio signal from input to output to give your home theater
a clean yet powerful sound, alive with all the details of the original
recording.
Wide-Range
Play Capability for DVD-Audio or SACD ::
New DDSC-Digital Processor,
for High-quality Sound Reproduction ::
1. 24-bit, 192-kHz Analog-to-Digital Conversion
The AVR-5803 is capable of 24-bit, 96-kHz or 192-kHz A/D conversion,
improving S/N and dynamic range by approximately 10 dB. A/D conversion
and DSP processing (*1) of external input signals (max. 8 channels)
is also possible. The AVR-5803 is thus able to perform bass management
and delay processing on DVD-Audio signals. THX post processing is
also possible with this DSP.
(*1). It is possible to select whether signals are to be processed
by the DSP or output as an analog signal.
2. 24-bit, 192-kHz Digital Interface Receiver
The AVR-5803 employs a total of four 24-bit, 192-kHz digital interface
receivers, one for every two channels, enabling multi-channel digital
input through DENON Link or external digital input to perform at
optimum potential.
3. New SHARC Dual 32-bit Floating Point DSPs
The AVR-5803 uses a dual configuration of new HammerHead SHARC 21161
32-bit floating point DSPs from Analog Devices.
4. 24 bit, 192 kHz All-channels Differential-mode D/A Conversion
For optimum fidelity and transparency, the AVR-5803 features 16 of
the latest Burr-Brown PCM-1738E high resolution 24-bit, 192 kHz DACs,
in.an eight channel, differential configuration (2 DAC channels per
each audio channel). These DACs feature DSD compatibility.
DENON’s
Latest Surround Technology Faithfully Recreates the Surround Sound
Produced at the Dubbing Stage. ::
- DTS-ES Discrete 6.1 / DTS-ES Matrix 6.1 / DTS NEO:6 / DTS 96/24
Dolby Digital / Dolby Digital EX / Dolby Pro Logic II
- THX Surround EX / THX Cinema / THX Ultra2 Cinema / THX Music Mode
DTS-ES
Discrete 6.1 + THX Post Processing ::
By adding THX Post Processing to the localized sound and spatial
expression of DTS-ES Discrete 6.1, your listening room is almost
completely transformed into a full-featured cinema.
DTS NEO:6 ::
DTS NEO:6 lets you enjoy 2-channel analog, PCM, and Dolby Digital
2-channel sources in full 6.1-channel surround sound.
DTS 96/24
5.1 Decoding for DVD-Video ::
High-quality 96-kHz, 24-bit (96/24) sound playback from ordinary
DVD-Video recordings is limited to only two channels and there
are also limitations on the picture. DVD-Video recorded in DTS
96/24, however, allows high-quality 5.1-channel sound playback in
full-quality, full-motion video.
Dolby Pro Logic IIx ::
Dolby Pro Logic IIx furthers the matrix decoding technology of Dolby
Pro Logic II to decode audio signals recorded on two channels into
up to 7.1 playback channels, including the surround back channel.
Dolby Pro Logic IIx also allows 5.1-channel sources to be played
in up to 7.1 channels. The mode can be selected according to the
source. The Music mode is the best suited for playing music, the
Cinema mode for playing movies, and the Game mode for playing games. The
Game mode can only be used with 2-channel audio sources.
Dolby Headphone ::
Since sound from a headphone enters the ears directly, it can cause
fatigue during extended listening sessions. Dolby Headphone replicates
the effects of sound from speakers in a room by localizing the
sound source at the front or the side as though the listener were
enjoying 3D sound at a movie theater. Dolby Headphone is effective
not only with Dolby Digital or Dolby Pro Logic but with CD and other
2-channel sources as well. The AVR-5803 also lets you record signals
encoded with Dolby Headphone to other recorders so that you can enjoy
the effects of Dolby Headphone with a portable MD player or other device.
(This is possible with both analog and digital recordings.)
5 Channel & 7 Channel
Stereo Modes ::
Dual Surround Mode Speaker Selection ::
Adjustable Cross-Over Switching ::
The AVR-5803 supports subwoofer cross-over switching with a choice
of 5 crossover frequencies: 40, 60, 80, 100, and 120. This lets
you more accurately match the performance characteristics of the
subwoofer to the main speaker system.
DENON Digital Link ::
High-grade LPCM 24-bit, 96-kHz, 6-channel or 24-bit, 192-kHz, 2-channel
(*3) digital input is possible when the AVR-5803 is connected via
a shielded twisted pair (STP) cable to a DVD player that supports
Denon Digital Link. Since Denon Digital Link uses low-voltage differential
signaling (LVDS), transfer capabilities of greater than 1.2 Gbps
at a differential voltage of approximately 0.3 Vpp are possible.
HDCD® Decoder
for HDCD® Disc Playback ::
External Digital Input ::
For future system expansion, the AVR-5803 provides an external digital
input port that supports multi-channel (6-/8-channel PCM) input
from an external unit. Multichannel digital signal input is possible
using a maximum of 4 sets of coaxial digital inputs.
Pure
Direct Mode, to Deliver Pure Audio Quality ::
AL
24 Processing Plus ::
High-quality Component
Video In/Out Terminals (100 MHz Bandwidth) ::
Video
Conversion ::
The AVR-5803 is equipped with a video switching system that converts
composite video signals to S-Video and/or composite and S-video
to component video. The input signal types---whether composite,
S-Video, or component---are auto detected, then the signal with the
highest picture quality is given highest priority and output to the
monitor. (Manual operation can be used to override auto detection.)
Support for Multi Zone
Configurations ::
The AVR-5803 provides a Multi Zone Output function and a Select function
that let you output different sources to multiple zones. Sources
can be selected for output to up to 2 additional zones, in addition
to the main room. Multi-room Zone 1 can have variable pre-amp output
along with composite video feed, and Multiroom Zone 2 can have fixed
stereo audio pre-output.
The AVR-5803’s Power Amplifier Assign function
lets you assign the 2 Surround Back (SB L/R) amplifier channels
when the system is not configured for 7.1, to instead drive the
Multi-room Zone 2 speakers, with 170 Watts per channel output power,
while still providing 5 discrete amplifier channels to drive all
speakers in a 5.1 configured home theater room.
2
Sets of 8-Channel External Inputs ::
Personal
Memory Plus ::
RS-232C Port ::
• Includes a RS-232C port to support an AMX, Crestron integrated control
system.
+12V and +5V Trigger Outputs ::
Icon-based
On Screen Display ::
Frequency
Synthesis Tuning ::
- 40-Station AM/FM Random Preset Memory Tuning
- Auto Preset Memory
Includes the Aktis RC-8000 Remote Control
Unit with Large LCD Touch Panel and the RC-8001st Charger/RF Base Station. ::
Input/Output Terminals For Every A/V System ::
- Audio Inputs
13 Sets Analog Input ..................... PHONO(MM), CD, TUNER,
DVD, VDP, TV, DBS/SAT, V.AUX, VCR-1, VCR-2, VCR-3, CDR/TAPE-1, MD/TAPE-2
2 Sets 8-ch Analog EXT. Input ....... FRONT L/R x 2, CENTER x 2,
SURROUND L/R x 2, SURROUND BACK L/R x 2, SUBWOOFER x 2
6 Sets Digital (Optical) Input .......... OPTICAL X 6
5 Sets Digital (Coaxial) Input ......... COAXIAL X 5
1 Set Dolby Digital RF .................... RF
1 Set DENON Digital Link............... DENON Link
- Audio Outputs
1 Set 8-ch Analog PRE Output ...... FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
5 Sets Analog REC Output ............ VCR-1, VCR-2, VCR-3, CDR/TAPE-1,
MD/TAPE-2
2 Sets Analog Multi Zone Output........ L/R (LINE OUT) x 1
........................................................ L/R (PREOUT)
x 1
2 Sets Digital (Optical) Output ........ OPTICAL x 2
- Video Inputs
3 Sets Component Video Input....... DVD, TV, DBS/SAT
8 Sets Composite Input ................. DVD, VDP, TV, DBS/SAT, V-AUX,
VCR-1, VCR-2, VCR-3
8 Sets S-Video Input ...................... DVD, VDP, TV, DBS/SAT,
V-AUX, VCR-1, VCR-2, VCR-3
- Video Outputs
1 Set Component Video Output ...... MONITOR
6 Sets Composite Output ............... VCR-1, VCR-2, VCR-3, MONITOR-1,
MONITOR-2, MULTI ZONE
5 Sets S-Video Output ................... VCR-1, VCR-2, VCR-3, MONITOR-1,
MONITOR-2
:: Specifications ::
Power Amplifier Section ::
Rated output *THD figures are power amp stage values.
Front............................ 170 W + 170 W (8 ohms, 20Hz - 20kHz,
0.05 % THD)
200 W + 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
Center......................... 170 W (8 ohms, 20Hz - 20kHz, 0.05
% THD)
200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround..................... 170 W + 170 W (8 ohms, 20Hz - 20kHz,
0.05 % THD)
200 W + 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround back ............ 170 W + 170 W (8 ohms, 20Hz - 20kHz, 0.05
% THD)
200 W + 200 W (6 ohms, 20Hz - 20kHz, 0.05 % THD)
Preamplifier Section ::
Input sensitivity/impedance
PHONO(MM)........................................ 2.5 mV/47 kohms
CD, DVD, VDP, TV, DBS/SAT, V-AUX, VCR-1, VCR-2, VCR-3, CDR/TAPE-1,
MD/TAPE-2, FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R ....................... 200 mV/47 kohms
SUBWOOFER...................................... 200 mV/15 kohms
Output level/Load impedance
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R,
SUBWOOFER...................................... 1.2 V/10 kohms
V-AUX, VCR-1 VCR-2, VCR-3, CDR/TAPE-1, MD/TAPE-2,
MONITOR ............................................ 200 mV/47 kohms
Frequency response ............................ 10 Hz - 100 kHz;
+0, -3 dB (DIRECT MODE)
RIAA deviation ..................................... ±1 dB (20 Hz
- 20 kHz)
Tone control ......................................... Treble: ±10
dB at 10 kHz, Bass: ±10 dB at 100 Hz
FM Section ::
Tuning frequency range ....................... 87.5 - 107.9 MHz
Usable sensitivity ................................. 1.0 µV (11.2
dBf)
AM Section ::
Tuning frequency range ....................... 520 - 1710 kHz
Usable sensitivity ................................. 18 µV
General ::
Power supply........................................ AC 120 V, 60
Hz
Dimensions .......................................... 434 (W) x 216
(H) x 486 (D) mm
17.1” (W) x 8.5”(H) x 19.1”(D)
Weight .................................................. 29.0 kg,
63 lbs 15 oz
|
|
